OIL COOLED ELECTROMAGNET
It is used in enterprises with a material height of more than 300 mm in places where over-the-belt material transportation is performed.
The cost of operation and installation is high.OIL COOLED ELECTROMAGNET
It is used in enterprises with a material height of more than 300 mm in places where over-the-belt materiOIL COOLED ELECTROMAGNET
It is used in enterprises with a material height of more than 300 mm in places where over-the-belt material transportation is performed.
The cost of operation and installation is high.
In the event of a power failure of the electromagnet or a malfunction in the Magnet, the magnetic attraction property will be lost.
DETESS has prevented the problem with a special automation that will stop the tape being transported against such problems, or with the application of a metal detector that will be installed after an electromagnet.
It has a higher gravitational force compared to permanent magnets.
Electromagnet strength is produced according to band width and suspension heightElectromagnet strength is produced according to band width and suspension height.
Insulation value 3000 AC test120 Mohm protectilectromagnet strength is produced according to band width and suspension height.
Insulation value 3000 AC test120 Mohm protection class IP 65 Electromagnet coils atromagnet strength is produced according to band width and suspension height.
Insulation value 3000 AC test120 Mohm protection class IP 65 Electromagnet coils are impregnated with silicone varnish and baked. Magnet cooling oil shell diala B Magnet coil is glass fiber insulated.
The electrical control panel is not affected by dust and moisture in IP 65 protection class.
The rectifier diodes are air-cooled and protected against peak currents.
ACCORDING TO MAGNET TYPE:
Permanent magnet separators
Electromagnet separators
Specially designed (DETESS)'s specially produced Permanent Ferrite magnet
Electromagnet with a magnetic core specific to (DETESS) with very low magnetic flux resistance.
Production with the appropriate power for the bandwidth and material height passing through the band.
Considering the continuous operation of the electromagnet, energy loss and long service life of the system, commissioning the separator with a sensor before the separator is a DETESS recommendation.idering the continuous operation of the electromagnet, energy loss and long service life of the system, commissioning the separator with a sensor before the sConsidering the continuous operation of the electromagnet, energy loss and long service life of the system, commissioning the separConsidering the continuous operation of the electomagnet, energy loss and long service life of the system, commissioning the separator with a sensor before the separator is a DETESS recommendation.
The cooling process in the always-working electromagnets is oil-cooled with DETESS specially produced heat exchangers.
SPECIFICATIONS OF THE SEPARATOR BAND:
10mm T 40 or T 20 profile tape (in Electromagnets)
8 mm L 40 profile polyester core M8 tape
KD type helical gear inclined reducer
Replaceable national drum
Reclined (side-painted) working, double-bearing 22000 series bearings with appropriate features.
Universal fixed shaft drum system is a product of DETESS's own production.
Steel drawn drum with dynamic balancing